Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: stevebubs on 25 March 2007, 20:57:29

Title: Oil cooler change....Part Numbers....
Post by: stevebubs on 25 March 2007, 20:57:29

Looks like I may need to do an oil cooler change in the near future - coolant level is dropping from max-min over a period of about 3 months and has a mayo like film on top.

Anyone got a list of part numbers, and approximate costs (TC / non-TC) so I can start figuring  out how much I'm gonna have to pay to get the bits?

Ta

Stephen

Title: Re: Oil cooler change....Part Numbers....
Post by: Markjay on 25 March 2007, 22:18:31

Apparently you will need for the job:

------------------------------------------------------------------------------
Note:     Use new banjo bolt.

Parts:                                Part-No.:        Catalog-No.:
1 Heat Exchanger (Stainless Steel)    13 101 668       90 06 313
2 Banjo bolt                          90 424 578       13 36 977
1 Sealing                             09 163 307       15 03 301
4 Seal ring                           11 076 852       20 91 055
2 Seal ring                           90 409 175       06 50 760
------------------------------------------------------------------------------

Title: Re: Oil cooler change....Part Numbers....
Post by: Markie on 25 March 2007, 22:33:15

not on tc but i got my cooler and plate here

http://cgi.ebay.co.uk/Vauxhall-Oil-Cooler-Cavalier-Vectra-Omega-Sintra-Signum_W0QQitemZ200074437272QQcategoryZ10404QQrdZ1QQssPageNameZWD1VQQcmdZViewItem#ebayphotohosting

This is where i bought mine from and as cheap as you will get it......

Also need the parts listed above by markjay which will add another £20.
Finally oil filter and oil for oil change and loads of coolant to change / flush it ( that is on tc)

Hope this helps  :y

oh and do it the mark dtm way ------dont bend the oil cooler pipes - remove them at filter  ;)

Title: Re: Oil cooler change....Part Numbers....
Post by: Markjay on 25 March 2007, 23:05:37

(http://img341.imageshack.us/img341/2626/oilcoolerxc6.jpg) (http://imageshack.us)

Title: Re: Oil cooler change....Part Numbers....
Post by: Markie on 25 March 2007, 23:16:36

markjay strikes again with his invaluable picture / diagrams  :y :)

Title: Re: Oil cooler change....Part Numbers....
Post by: Markjay on 25 March 2007, 23:22:45

Thank you Markie....  :-[ :)

Title: Re: Oil cooler change....Part Numbers....
Post by: stevebubs on 26 March 2007, 00:02:18

Thanks for the quick replies folks.

Guess while I've got the system drained I could also replace the Heater Bypass Valve at the back of the bay - gonna have the car a while and it's rolled over the 100k miles so it's just gonna be a matter of time I guess.

Any part numbers for this around?

Chrs

Stephen

Title: Re: Oil cooler change....Part Numbers....
Post by: Markjay on 26 March 2007, 00:44:55

HBV P/N 90566947

See also:

http://cgi.ebay.co.uk/Vauxhall-Heater-Valve-Bypass-Omega-Vectra-CorsaB_W0QQitemZ200086373647QQcategoryZ10404QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

Title: Re: Oil cooler change....Part Numbers....
Post by: stevebubs on 26 March 2007, 01:19:59

Ta!!!