Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ClarCE on 13 April 2007, 11:50:45

Title: Torque Values for Autobox Sump Bolts..
Post by: ClarCE on 13 April 2007, 11:50:45

I need both the large and small sump settings if possible, looks like I've got a leak  :'(

Cheers in advance,

Chris.

Title: Re: Torque Values for Autobox Sump Bolts..
Post by: Admin on 13 April 2007, 12:00:55

Quick check says the following:

M8 Bolts = 20nm

M10 Bolts = 40nm

Different size bolts on the 2 sumps.

I am going to double check though as 40nm seems too high to me...

Title: Re: Torque Values for Autobox Sump Bolts..
Post by: ClarCE on 13 April 2007, 12:15:00

Quote

Quick check says the following:

M8 Bolts = 20nm

M10 Bolts = 40nm

Different size bolts on the 2 sumps.

I am going to double check though as 40nm seems too high to me...

Hmm, mine were all the same size, could the m10 be the the 3 bolts for the filter?

40 does sound high to me too...

Cheers LB :)

Title: Re: Torque Values for Autobox Sump Bolts..
Post by: omegalyn on 14 April 2007, 00:22:58

Hi there, in the haynes manual it states that for 2.0 and 2.5 auto box ID code AR25, the sump retaining bolts are 12 Nm. dos not say anything about the intermediate sump!
Hope this helps.

Title: Re: Torque Values for Autobox Sump Bolts..
Post by: Marks DTM Calib on 14 April 2007, 07:22:49

They are all 12Nm.......

Title: Re: Torque Values for Autobox Sump Bolts..
Post by: Markjay on 14 April 2007, 10:03:53

Quote

They are all 12Nm.......

Yep, that's also what TIS2000 says...  :y