Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: jonny2112 on 18 April 2007, 21:09:59

Title: Unplug the injector loom.......
Post by: jonny2112 on 18 April 2007, 21:09:59

Can someone give me a bit more information on this task, as part of changing the cam cover gaskets, please?
Thanks a lot

Title: Re: Unplug the injector loom.......
Post by: TheBoy on 18 April 2007, 22:09:20

Quote

Can someone give me a bit more information on this task, as part of changing the cam cover gaskets, please?
Thanks a lot

Blooming great multiplug behind the injector/inlet....

Title: Re: Unplug the injector loom.......
Post by: Markjay on 18 April 2007, 23:05:08

Quote

Quote

Can someone give me a bit more information on this task, as part of changing the cam cover gaskets, please?
Thanks a lot

Blooming great multiplug behind the injector/inlet....

*** EDIT: Wrong picture removed  :-[ ****

Title: Re: Unplug the injector loom.......
Post by: JamesV6CDX on 19 April 2007, 00:22:33

Looks more like multiram?

Title: Re: Unplug the injector loom.......
Post by: Markjay on 19 April 2007, 00:59:46

Quote

Looks more like multiram?

Err, yes, there is a plug at the far end of the injectors rail.... can't bee seen in the pic though:

(http://img103.imageshack.us/img103/563/image053lg3.jpg) (http://imageshack.us)

Title: Re: Unplug the injector loom.......
Post by: TheBoy on 19 April 2007, 08:15:56

Its a large connector - you can't miss it during stripdown, and it simple unclips. Nothing to worry about really :)

Title: Re: Unplug the injector loom.......
Post by: Ronald_McBurger on 19 April 2007, 08:55:28

Undo the torx bolts holding the inlet manifold in place, slide the manifold towards you and you will see the multiplug. Undo and then tip the manifold over to the right so you can remove. WATCH OUT FOR THE BOLTS FALLING INTO THE INLETS!

Title: Re: Unplug the injector loom.......
Post by: Martin_1962 on 19 April 2007, 10:33:34

I left mine connected!