Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Paulus on 17 April 2007, 08:04:32
-
Where can I find it? I have had a good look around the unit, well, what I think is the unit, but can't find it. I have got a 1999 3.0 Elite (if it makes any difference).
-
According to EPC:
Unit, Hydraulic, ABS:
X25X & X30X to V1999999 - Vx P/N 90444660 / Bosch P/N 0265203003
X25X & X30X from W1000001 - Labelled DX / Vx P/N 9117170 / Bosch P/N 0265220449
(I think the W1000001 is the 97/98 mini-facelift break point - not sure)
and it should look like this one:
(http://img83.imageshack.us/img83/7245/kcimg6405ui0.jpg) (http://imageshack.us)
-
I hope it doesn't look like that one as thats the early 3 port version.....
-
I hope it doesn't look like that one as thats the early 3 port version.....
I chose a pic that looks like the diagram on EPC... that's what EPC is showing....
I also have this picture:
(http://img179.imageshack.us/img179/4850/9f1byi9.jpg) (http://imageshack.us)
and if this is the right one, then the pic on EPC is wrong...
-
EPC pics are only indicative....
The second pic is correct....
-
EPC pics are only indicative....
The second pic is correct....
Thanks :y
-
Thanks guys,
My vin starts with an "X", so I presume X25X & X30X from W1000001 - Labelled DX / Vx P/N 9117170 / Bosch P/N 0265220449 is correct
-
Thanks guys,
My vin starts with an "X", so I presume X25X & X30X from W1000001 - Labelled DX / Vx P/N 9117170 / Bosch P/N 0265220449 is correct
Worth checking the ident code on yours (DX), though it seems right for the later type...
-
So where do I need to crawl/view to see the numbers on the unit?
-
The unit is installed in the engine bay to the right hand side of the engine when viewed from the front, fairly low down, roughly under the PAS reservoir and on top of the oil filter (eesh).
I can see mine but apart from some Bosch logo there are no numbers that can be read from this angle... perhaps with you can get under the car...