Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: ians on 01 May 2007, 13:31:46
-
This feels like it should be an April 1st posting..
I have convinced myself that the dipstick gives a different reading depending which way round it is inserted.
If the markings are towards the engine (which feels correct) it reads about half a litre less than if I insert it with graduations pointing away from the block.
Am I cracking up?
Cheers,
Ian
-
This feels like it should be an April 1st posting..
I have convinced myself that the dipstick gives a different reading depending which way round it is inserted.
If the markings are towards the engine (which feels correct) it reads about half a litre less than if I insert it with graduations pointing away from the block.
Am I cracking up?
Cheers,
Ian
How quickly are you withdrawing after insertion? ;D Oooer
-
Just after it enters the sump ;)
.. I just knew I'd get a comment like that
-
This feels like it should be an April 1st posting..
I have convinced myself that the dipstick gives a different reading depending which way round it is inserted.
If the markings are towards the engine (which feels correct) it reads about half a litre less than if I insert it with graduations pointing away from the block.
Am I cracking up?
Cheers,
Ian
You must be parking sideways on a very very steep slope.... ;D
-
Have you been drinking?
;D
-
I wish :) :)