Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gnasha on 03 June 2007, 13:59:57

Title: plug
Post by: gnasha on 03 June 2007, 13:59:57

while taking apart to do plugs and leads found a 3 pin plug not connected to anything any one no what its for it was hanging around near dis pack

Title: Re: plug
Post by: Markie on 03 June 2007, 14:03:52

can you fire on a picture so we can try to identify?

Title: Re: plug
Post by: JamesV6CDX on 03 June 2007, 16:10:16

Quote

while taking apart to do plugs and leads found a 3 pin plug not connected to anything any one no what its for it was hanging around near dis pack

A stab in the dark here, BUT often on the V6 when people change crank sensors, they cut the old wire rather than completely removing it, often leaving a strange plug behind...

Title: Re: plug
Post by: JasonH on 03 June 2007, 19:58:12

3 pin plug near the DIS pack.... as James says very likely to be an old crank sensor connector.

The original wiring is very hard to get out so people leave them there.

Title: Re: plug
Post by: cdx25 on 04 June 2007, 00:27:30

Quote

3 pin plug near the DIS pack.... as James says very likely to be an old crank sensor connector.

The original wiring is very hard to get out so people leave them there.

Yep - I had one there too which was old crank sensor.  Reliable, aren't they?  ;D