Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: driver1 on 02 July 2007, 10:50:44

Title: Switch removal
Post by: driver1 on 02 July 2007, 10:50:44
Hi guys, i want to change a couple of switches in the centre consul, they are looking a bit worn so i got some from fleabay. Do i need to remove the radio and wood surround to do this, or do they just prise out.  :)

Thanks Paul
Title: Re: Switch removal
Post by: Markie on 02 July 2007, 11:26:55
Which switches are you referring to - the standard TC, Electric Blind, Heated window etc that are in a row above the radio but below the heater will just prize out ( gently with a small flat screwdriver) on a pre facelift

Title: Re: Switch removal
Post by: philayl on 02 July 2007, 13:16:43
Hi, if you decide to change the hazard warning switch remember to pull the front off it first, then remove the switch itself. I changed all mine for the blue LED type, they don't look too bad at all.
Title: Re: Switch removal
Post by: driver1 on 02 July 2007, 15:04:18
Thanks for the help guys, switches all done and looking good.  :y
Title: Re: Switch removal
Post by: Markie on 02 July 2007, 15:38:42
Quote
Thanks for the help guys, switches all done and looking good.  :y


neon or standard?