Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 12 July 2007, 20:01:20

Title: ***** cable tray
Post by: Martin_1962 on 12 July 2007, 20:01:20

What a dreadful job - I almost had to break it off - took twice as long to do the left bank compared to the right bank

Title: Re: ***** cable tray
Post by: TheBoy on 12 July 2007, 20:04:33

Quote

What a dreadful job - I almost had to break it off - took twice as long to do the left bank compared to the right bank

Not sure what you were doing, but easier if you remove loom from tray, and remove tray completely.

Title: Re: ***** cable tray
Post by: megaomega123 on 12 July 2007, 21:01:08

I would say removing the cable tray was the arsiest job of the day

Title: Re: ***** cable tray
Post by: STMO123 on 12 July 2007, 21:08:39

Quote

I would say removing the cable tray was the arsiest job of the day

Word of the day :y

Title: Re: ***** cable tray
Post by: Martin_1962 on 12 July 2007, 22:32:03

Splitting it is a PITA, those clips are yuck

Plug 6 was easy I thought it was supposed to be difficult to do ::)

Title: Re: ***** cable tray
Post by: Markie on 12 July 2007, 23:08:39

plug change then  :-/

Title: Re: ***** cable tray
Post by: Martin_1962 on 12 July 2007, 23:33:32

Yes - I removed the 4 electrode Bosch with about 2mm gap and replaced with new NGK 2 electrode ones, supposed to be better for LPG.

There is more to say but nothing said yet.