Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Sonic_Boom on 13 August 2007, 15:38:20
-
I've just bought these alloys:
(http://img.photobucket.com/albums/v63/Cossie735/OmegaIrmsherAlloys.jpg)
But they didn't come with centre caps can anyone point me in the right direction of where I could get some?
Cheers Rich
-
May as well get them from the dealers, can't imagine they would be that expensive, you'll also need the little plastic cover for each wheel nut (so 20 in all)
-
I dont think you necessarily need the wheel nut plastic caps, personal choice i suppose, I put my original nuts on my elite wheels that came with the car on GLS wheels, I bought a set of locking nuts though
you could keep your eyes open for a elite being broken in a scrapyard and see if you can get the centre caps dirt cheap
-
I'll go into Lookers tomorrow and see how much they are.
Cheers Rich
-
I've just bought these alloys:
(http://img.photobucket.com/albums/v63/Cossie735/OmegaIrmsherAlloys.jpg)
But they didn't come with centre caps can anyone point me in the right direction of where I could get some?
Cheers Rich
The ones for the pre face lift Elite 16" s are about £9.50 + vat retail... try with a TC... should bring 'em down a bit...
Just a ball parker..
DC
-
Take care that they are genuine VX rims and not simply a similar substitute.
I know that Markie on here got a similar set but the centre cap holes are a VERY slightly differring size - only 1mm or so - but enough so that the caps do not fit tightly and simply fall out...... :-/
-
Take care that they are genuine VX rims and not simply a similar substitute.
How do I tell?
Cheers Rich
-
Take care that they are genuine VX rims and not simply a similar substitute.
How do I tell?
Cheers Rich
Would guess at 'Irmscher' and a VX part number cast into the inside of the rim on the leg area but to be sure, PM Markie and he will advise whats on his. :y
-
Take care that they are genuine VX rims and not simply a similar substitute.
How do I tell?
Cheers Rich
Would guess at 'Irmscher' and a VX part number cast into the inside of the rim on the leg area but to be sure, PM Markie and he will advise whats on his. :y
Actually, i dot have centre caps on mine and i am still looking, i have been given ( but not bought or checked it out) part number v0009179671 039E03 HUB COVER SIL 20.73 for 4 including VAT, 4.90 each excluding vat
-
I've just tried my 16" Elite centre caps on the said 17" which fit perfectly but obviously don't look right.
Rich