Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SP_3.2 on 19 September 2007, 12:41:35

Title: The Rubber seal thing.
Post by: SP_3.2 on 19 September 2007, 12:41:35

Hi guys i know that this is going to be a bad description but I need to know the part number for the Rubber seal that goes on the back on the plastic part of the Breather. this is the part that you have after you have removed the ECO cover. It where the air comes out of from the Breather box and goes into the engine via a round recess with one hole ether side.   Sorry for the poor description but don,t know the name. :-[
Thanks  
Title: Re: The Rubber seal thing.
Post by: VXL V6 on 19 September 2007, 12:47:56
It's called the 'Breather bridge to plenum seal'..... But I can't remember the part no!
Title: Re: The Rubber seal thing.
Post by: SP_3.2 on 19 September 2007, 13:07:23
Thank for that i will check it out,  :y
Title: Re: The Rubber seal thing.
Post by: Marks DTM Calib on 19 September 2007, 13:39:17
The part number for that and the O rings are in the breather cleaning maintenance guide.