Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: VX1 on 18 September 2007, 19:00:26
-
Evenin all,
Well I gave my headlights a clean with 1200 grit wet an dry as suggested on here a few times and then gave them a polish. I have not seen anyone put the end results of there cleaning of there headlights so I thought I would. So here you go these pics are before I cleaned them and after.
If you look closely you can see that they are dull.
(http://www.mypicshare.com/thumbs/20070918/2v6rl633.jpg) (http://www.mypicshare.com/2v6rl633pic.html)
(http://www.mypicshare.com/thumbs/20070918/l1n4m6hg.jpg) (http://www.mypicshare.com/l1n4m6hgpic.html)
(http://www.mypicshare.com/thumbs/20070918/ojzu2ucx.jpg) (http://www.mypicshare.com/ojzu2ucxpic.html)
(http://www.mypicshare.com/thumbs/20070918/9a3cj5zz.jpg) (http://www.mypicshare.com/9a3cj5zzpic.html)
(http://www.mypicshare.com/thumbs/20070918/jmu73i7b.jpg) (http://www.mypicshare.com/jmu73i7bpic.html)
Just need to wire up the fogs now. ::)
-
the bumper's gone dark too :o
-
Yeah I know. I hate sneezing all the time, should clear my nose before I start doing anything like this ;D ;D ;D ;D.
Seriuosly though I upgraded the front and rear bumpers from a cd car. But now I need to wire them in as they don't work yet, wiring isn't at the fuse box :(
-
Did you tried very fine polish with machine , seems like not totally polished ?
PS: Glass polishing is really hard job..I think necessary more work.
-
Did you tried very fine polish with machine , seems like not totally polished ?
PS: Glass polishing is really hard job..I think necessary more work.
There are better than before but as you say need abit more work doing. I used T cut but I do have some GS27 in the garage so might use that next time.
-
Remember Headlight 'glass' is Plastic in this case ;)
-
polishing is applicable to plastics also :)
-
I recently installed brand new fog lights, and that made the old head lights look awful in comparison. I wet sanded with 2400 grit, then with 4000grit and finally polished with Meguiars ScratchX (should have used PlastX but didn't care). The lenses look almost like new.
-
How much are xenons these days?
-
How much are xenons these days?
xenon's or projector's?