Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dbug on 23 September 2007, 18:38:37
-
Hi
1998 Elite 2.5V6 Auto
Decided 2day to check plug type on crank sensor (ever since i have had car rarely starts first time but always 2nd so decided to change crank sensor) b4 ordering off fleebay.
Removed wipers - came off easy, and then scuttle to get to sensor plug.
TIP - B4 removing wipers operate first then stick a length of masking tape on windscreen level with tops of blade rubbers. When refitting to splines align with masking tape first - easy way of getting back on in correct position.
Bonus? Unplugged sensor, refitted plug, scuttle and wipers.
Now appears to start ok 1st time!!!!!!
Will monitor.
-
Mmmmmmmmmm, Did it start first time the first time, or second time? Does this mean that the first time it started second time, but the second time it started first time? :-X
-
You must watch them tablets Fin ;D
-
Mmmmmmmmmm, Did it start first time the first time, or second time? Does this mean that the first time it started second time, but the second time it started first time? :-X
:question :question :question ;D ;D ;D ;D ;D ;D