Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: The Barge Captain on 01 October 2007, 19:50:46
-
Help!
Does the feed to the HBV come from the branch on the big coolant pipe that runs around the block (which i think is correct) or from the colant bridge?
Stripped it all out to change the exhaust manifold gasket and now can't remember where the pipes go. Duhhh :-[
-
Can't anybody remember?
-
Sod it. I'm going to connect it to the big pipe.
JasonH - if you know any different call me on my mobile mate.
-
OK.
So it helps if you connect the right pieces of pipe together.
Turns out I was trying to attatch the piece that goes from the coolant bottle to the big pipe, to the HBV >:(
What a pillock.
Plumbing all ok now, so went to the pub for a couple of chill out pints.
Will finish off tomorrow.
-
OK.
So it helps if you connect the right pieces of pipe together.
Turns out I was trying to attatch the piece that goes from the coolant bottle to the big pipe, to the HBV >:(
What a pillock.
Plumbing all ok now, so went to the pub for a couple of chill out pints.
Will finish off tomorrow.
:y