Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Senninha on 18 November 2007, 00:41:41

Title: Bolts or Torque screws for bumper?
Post by: Senninha on 18 November 2007, 00:41:41

Hi everyone!
I have a facelift irmscher rear bumper on my pre facelift Omega, and I was wondering what went on where as the bracket holes are the other way on the wheelarch liner at the bottom of the bumper,
Could someone confirm that there is brackets, and you have to use nuts and bolts instead of torque screws with the screw clamps? :-/

Incase any of you are wondering Im just replacing the impact beam which is rusty and bolts/nuts which are very rusty!  ;D
Any pictures would be handy :)

Title: Re: Bolts or Torque screws for bumper?
Post by: STMO123 on 18 November 2007, 11:57:51

Anyone?

Title: Re: Bolts or Torque screws for bumper?
Post by: Marks DTM Calib on 18 November 2007, 12:20:19

A bit of a mix....some torx screws and a few clips from memory.

The bumper iron is bolted on.

Title: Re: Bolts or Torque screws for bumper?
Post by: Senninha on 18 November 2007, 18:22:45

Quote

A bit of a mix....some torx screws and a few clips from memory.

The bumper iron is bolted on.

How do you mean iron is bolted on?