Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: madmax on 26 November 2007, 20:03:40

Title: using forte flush
Post by: madmax on 26 November 2007, 20:03:40
my forte coolant flush arrived of ebay today instructions say use at 20% volume then fast idle for 30 minutes so does that mean 20% of bottle  or 20% water and add entire bottle i know loads of you have used it before and have more knowledge than me :D
Title: Re: using forte flush
Post by: STMO123 on 26 November 2007, 20:42:18
It means use 1 part forte, 4 parts water.
Title: Re: using forte flush
Post by: Darth Loo-knee on 26 November 2007, 20:47:18
i just put the whole bottle in :y

takes a while to get it all out though..
Title: Re: using forte flush
Post by: Dazzler on 26 November 2007, 20:51:11
I ran mine around on a 50 mile trip and then flushed it out keeping the engine running putting water going in the expansion tank and having the valve open on the rad to let it out, kept it like this until all the water came out clear, then added in the antifreeze until the water started to come out pink then turned off done up the bleed screw on the rad, done a final top up and job done.