Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MartinP on 01 January 2008, 16:35:24

Title: 3.0 v 2.5 camcovers
Post by: MartinP on 01 January 2008, 16:35:24

Are they the same?

EPC shows different part numbers, is this only because they are in different engine sections or is there a physical difference?

As I understand the heads are the same with higher lift cams in the 3.0ltr

comments please

Title: Re: 3.0 v 2.5 camcovers
Post by: TheBoy on 01 January 2008, 16:37:28

Pretty certain heads are different, so probably covers different.

Thinking about it, 3.0 has different bore to 2.5, so heads will differ.

Title: Re: 3.0 v 2.5 camcovers
Post by: Marks DTM Calib on 01 January 2008, 19:47:03

There the same......only difference on the heads is the dish in the combustion face....its a bit larger on the 3.0.

Title: Re: 3.0 v 2.5 camcovers
Post by: MutantCav on 01 January 2008, 20:14:57

The cam covers are the same, the 1mm difference on 3.0 cams dont affect the covers and neither will the slightly increased size bores...the heads size and shape themselves are the same...

Title: Re: 3.0 v 2.5 camcovers
Post by: MartinP on 01 January 2008, 21:01:01

Thanks,

Any idea why they have different part numbers on EPC?