Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Turk on 22 December 2007, 14:20:54

Title: Thermostat 2.5td
Post by: Turk on 22 December 2007, 14:20:54

I have a replacement Thermostat (Made by First Line) Pt No.FT385.80 (Refers to QTH393K).

Before I start pulling things apart, is this the correct one.

To fit a '00 2.5td.  (t/stat housing is black plastic)  

Title: Re: Thermostat 2.5td
Post by: TheBoy on 22 December 2007, 18:28:39

Sounds right, does it say 80 degrees on it, and double check the QHT number on the Quinton & Hazell website

Title: Re: Thermostat 2.5td
Post by: Turk on 23 December 2007, 12:15:05

Yep, dats da one !!  Just checked the QH Site and 393K is correct.

Cheers.

Title: Re: Thermostat 2.5td
Post by: Teaser on 13 January 2008, 14:36:03

Hi again, so changing your stat did not cure overcooling ??

Title: Re: Thermostat 2.5td
Post by: Turk on 13 January 2008, 19:11:06

Not done it yet. Haven't had the time..and an argument with an un-lit traffic island on Christmas Eve put it back a bit.

I'm pretty certain it's a seized open t/stat issue.

Looks like we've got the same issue...Race ya !!  ;D

Title: Re: Thermostat 2.5td
Post by: kbou55 on 13 January 2008, 19:37:45

Quote

Sounds right, does it say 80 degrees on it, and double check the QHT number on the Quinton & Hazell website

http://www9.qha.com/uk/technical/qhcatalogues.htm#qh1

if i only knew before now QH were on the web..........