Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Richard A on 20 January 2008, 12:21:45
-
About to change the 'cooling fan thermo-switch' located directly below the top hose, not sure but appears to be leaking fluid, looked in the Haynes 'bible' but as yet not found the torque, any idea's.
regards
richard
-
It's not going to very much. I can't remember if there's a copper/ally washer between the switch and the rad header, but be carefull as the header is obviously plastic. I'd tighten by hand & then a gnats cock more. ;D :y
-
Cheers, yes there is a copper washer, I got the switch from 'issunaz', he wasn't sure about the washer either, we also agreed the torque would be in the Haynes manual, however I have not found it, he did say how little force was required to unscrew it, so the torque should be low.
regards
richard