Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: dbug on 02 March 2008, 16:42:01

Title: V6 Crank spanner
Post by: dbug on 02 March 2008, 16:42:01

Is this ok for use on Crank on V6?

http://cgi.ebay.co.uk/DRAPER-27MM-X-30MM-EXPERT-TORQ-DEEP-OFFSET-RING-SPANNER_W0QQitemZ270194879568QQihZ017QQcategoryZ30917QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

Thanx

Title: Re: V6 Crank spanner
Post by: Dazzler on 02 March 2008, 17:08:50

Crank bolt on the V6 is a Torx headed bolt :-/

Title: Re: V6 Crank spanner
Post by: maria on 02 March 2008, 17:10:19

E20 Torx

Title: Re: V6 Crank spanner
Post by: Andy B on 02 March 2008, 17:12:33

Quote

Is this ok for use on Crank on V6?

http://cgi.ebay.co.uk/DRAPER-27MM-X-30MM-EXPERT-TORQ-DEEP-OFFSET-RING-SPANNER_W0QQitemZ270194879568QQihZ017QQcategoryZ30917QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

Thanx

Do you mean for when you do your cam belt? If so yes, it will hold the eccentric for you.

Title: Re: V6 Crank spanner
Post by: dbug on 02 March 2008, 17:17:21

Quote

Quote

Is this ok for use on Crank on V6?

http://cgi.ebay.co.uk/DRAPER-27MM-X-30MM-EXPERT-TORQ-DEEP-OFFSET-RING-SPANNER_W0QQitemZ270194879568QQihZ017QQcategoryZ30917QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

Thanx

Do you mean for when you do your cam belt? If so yes, it will hold the eccentric for you.

Yes - to adjust position of tensioner pulley.
Sorry my post wasn't clear - knew crank bolt was E20 torx.
Thanx all

Title: Re: V6 Crank spanner
Post by: Marks DTM Calib on 02 March 2008, 17:18:25

It should be fine for the idler adjustments

This is the one I have:

http://cgi.ebay.co.uk/DRAPER-54302-30mm-HI-TORQ-COMBINATION-SPANNER_W0QQitemZ300199730095QQihZ020QQcategoryZ30917QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem