Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: 106rallye on 07 March 2008, 22:30:03

Title: Dis Pack bolt
Post by: 106rallye on 07 March 2008, 22:30:03

does anyone know off the top of their head what the bolts are that hold the dis pack on?

Title: Re: Dis Pack bolt
Post by: Marks DTM Calib on 07 March 2008, 22:31:05

From memory.....E10 torx....could be E8 though..

Title: Re: Dis Pack bolt
Post by: theolodian on 08 March 2008, 06:56:02

E10 I think.  Need to have 1/4" drive, and it is one size above what is usually available as 1/4" drive.  >:(

8mm socket will also work IF they aren't rusted in, and then it just rounds them off.  If you can get a couple of the bolts out and you're stuck you can gently break it out with a pry bar.  The plastic is very weak, just be careful what you use as a fulcrum point.

Title: Re: Dis Pack bolt
Post by: Timbuk on 09 March 2008, 16:52:58

Defo E10, did one yesterday