Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: 106rallye on 15 March 2008, 15:22:31
-
Hey guys.
Im in the middle of changing the dis pack and for the life of me i cant get the dam thing out! everthing is off it but i cant find a hold big enough for it to fit through and get the new one in, tried both the top and the bottom. help please :'(
-
I take it the scuttle is off??
You might have to remove plenum.... very quick just use a bit of oil on the O rings when replacing
-
naa cant remove scuttle, the wipers are seized on and i dont have a puller
-
so were mine when I first tried. Put a squirt of wd40 in the wiper bolt area tap it lightly with a small hammer and then just wriggle it like f%$£, particularly in and out toward the windscreen and out and it will come off.
-
The car is doing my head in! got everytthing back together, leads on the same way, but when i try to start it its as though they are on wrong! im ready to burn this thing!
-
The car is doing my head in! got everytthing back together, leads on the same way, but when i try to start it its as though they are on wrong! im ready to burn this thing!
Just double check passenger bank leads - the order is odd on the DIS...
-
ive double and triple checked it against what i have wrote down (which im starting to think must be wrong)
Does anyone know if this is right?
(http://img134.imageshack.us/img134/8913/engineanddisnr8.png)
-
they numbers arnt the firing order, just what i numbered the leads when i was doing the rocker gaskets
-
That looks wrong to me...
-
Cylinder order is
BACK
6
5
4
3
2
1
FRONT
Still looking for DIS order, from memory its
1 3 5
2 6 4
but hopefully someone can confirm the DIS bit first
-
.....
Still looking for DIS order, from memory its
1 3 5
2 6 4
but hopefully someone can confirm the DIS bit first
Mine is (from a note I made when I changed mine)
4 6 2 p
l
u
1 3 5 g
-
.....
Still looking for DIS order, from memory its
1 3 5
2 6 4
but hopefully someone can confirm the DIS bit first
Mine is (from a note I made when I changed mine)
4 6 2 p
l
u
1 3 5 g
Yours sounds correct :y
-
.....
Still looking for DIS order, from memory its
1 3 5
2 6 4
but hopefully someone can confirm the DIS bit first
Mine is (from a note I made when I changed mine)
4 6 2 p
l
u
1 3 5 g
Yours sounds correct :y
right now im really confused, i changed it to that and its not starting at all, before it would run really rough for a few secs then die, now as soon as it catches its dying :'( its to dark now so will have to look at it again tomorrow but i have no idea whats wrong
-
ok ive checked every single thing 3 or 4 times, everything is in the right order, nothing else is unplugged, tried it with new HT leads and nothing. and to top it all off i think the started as packed in!
only thing i can think of is the park that im trying to fix is damaged, can anyone think of anything else?
-
Is that order correct for the older 95 dis packs?? Only the connector is on the top on the older ones not at the side?? Are the older dispacks different??
-
anyone?