Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: JamesV6CDX on 15 October 2007, 21:14:04
-
... As a standard, steel wheel, 5 stud 16 inch, that will fit the Omega, and take a 225/55 tyre? Cheers
-
... As a standard, steel wheel, 5 stud 16 inch, that will fit the Omega, and take a 225/55 tyre? Cheers
If the offset and PCD are the same....
Remember all manufacturers use different PCDs and offsets.
-
... As a standard, steel wheel, 5 stud 16 inch, that will fit the Omega, and take a 225/55 tyre? Cheers
If the offset and PCD are the same....
Remember all manufacturers use different PCDs and offsets.
Yes, do VX do one that will fit?
-
... As a standard, steel wheel, 5 stud 16 inch, that will fit the Omega, and take a 225/55 tyre? Cheers
If the offset and PCD are the same....
Remember all manufacturers use different PCDs and offsets.
Yes, do VX do one that will fit?
I believe Vx ones are all 15". Why Steel wheels - the 225 tyre is too wide to fit saloon spare wheel area?
-
Testing reasons.
Do you think I'd stand a chance, of getting a matching alloy for my car?
Unfortunately, a longer run has identified that a VERY slight vibration may still exist. It's a million times better, it may even be in my mind (one can become paranoid to these things!)..
-
Testing reasons.
Do you think I'd stand a chance, of getting a matching alloy for my car?
Unfortunately, a longer run has identified that a VERY slight vibration may still exist. It's a million times better, it may even be in my mind (one can become paranoid to these things!)..
Can't remember for def, but yours had fairly std CDX alloys? If so, shouldn't be that difficult to obtain with a little effort and time.
-
Testing reasons.
Do you think I'd stand a chance, of getting a matching alloy for my car?
Unfortunately, a longer run has identified that a VERY slight vibration may still exist. It's a million times better, it may even be in my mind (one can become paranoid to these things!)..
Can't remember for def, but yours had fairly std CDX alloys? If so, shouldn't be that difficult to obtain with a little effort and time.
Yep, standard facelift CDX wheels...
-
Sets of four come up from time to time on eBay, I guess you'd have to take a flyer on them being ok though..... Still your only really after one good one out of the four.
-
... As a standard, steel wheel, 5 stud 16 inch, that will fit the Omega, and take a 225/55 tyre? Cheers
The spare?
-
You might be better off having a ring around breakers yards, or some of the breakers on eBay, for a single wheel, they are more likely to get cars in that have buggered up 1 or 2 wheels if when cars have crashed. People are likely to want to sell whole sets.
-
.....
The spare?
It's only 15" ;)
-
Hello chaps...
You can fit a 225/55/16 spare in the boot of a saloon although you wont be able to use the cover that hides it.
i exchanged my steel spare which was a 16" for an alloy one....
-
.......
my steel spare which was a 16" for an alloy one....
You sure? I have 16" rims on my car but the spares is still only 15"
-
yes i'm possitive matey. it was a 162 inch rim but only had a 205 width tyre on it but i replaced it with a 225.
as i said it will go in but cant use the wheel cover....
-
205 it should have said there oops
-
ignore that too. it was a 16" rim.
-
16 inch steels are avaiable but you have to get them from a saab!!!!! :y
-
16 inch steels are avaiable but you have to get them from a saab!!!!! :y
And the stud pattern/offset etc etc is the same?
-
225/55/16 on a steel in the boot ,cover fits perfect,even keep the compressor in the hollow, 2003 model
-
16 inch steels are avaiable but you have to get them from a saab!!!!! :y
And the stud pattern/offset etc etc is the same?
yep its only a vauxhall in disguise!!!
:y