Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Dazzler on 15 April 2008, 15:22:38

Title: Re: front doors ...
Post by: Dazzler on 15 April 2008, 15:22:38

Have you checked that the 2 bolts holding that arm assy on the door are tight???

Get a good 2nd hand one on here, not to bad a job to replace or remove old one if not broken and give it a good clean and regrease and job done :y

Title: Re: front doors ...
Post by: f13platform on 15 April 2008, 15:37:16

rain rain lol

but i ll have a look .

if it s broken? i just have to take it out and change it?

Title: Re: front doors ...
Post by: Dazzler on 15 April 2008, 15:39:39

Yep,
Also check that the door frame is not cracked, if it is then you will have to fit reinforcing plates as well, not hard and not expensive, have a look in the maintenance guides for a how to ;)

Title: Re: front doors ...
Post by: f13platform on 15 April 2008, 15:54:03

thank u

Title: Re: front doors ...
Post by: f13platform on 15 April 2008, 17:05:11

i looked it s broken

the arm holder is broken

what i have too do?

Title: Re: front doors ...
Post by: Dazzler on 15 April 2008, 17:08:46

Get another catch assy.
Ask in the wanted section, chances are Chris or MarkieMark will have a good one or you can by new from Vx about £30ish i think.

Title: Re: front doors ...
Post by: f13platform on 15 April 2008, 17:42:50

i wouldnt do that. spend money in wrong desing

they put something so cheap and weak in very heavy door

i opened that bolt and leave it

the handel went inside so much the better  and no more noise

it got 2 suport .