Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: FRE07962128 on 17 April 2008, 12:56:35
-
I am a desperate damsel in distress, so can someone help me please?
I removed the dashboard on my Omega to replace a light bulb. Refitted it but now none of the clocks work, the central consul is dead, and only the indicators on the dashboard are working along with the temp. fuel, & handbrake warning lights flashing! I have refitted the dashboard four times, checking the terminals, but still no joy!
What have I done wrong please?
A tearful Lizzie Zoom :'( :'( :'( :'( :'(
-
sounds like something hasnt been plugged back in. :-/
-
Ive done similar myself today,
Dash out to change 3 illumination bulbs (only 1 gone)
Put it back together, and no lights!
Took it apart, reseated bulbs, put it back together, all happy.
You have pushed the dash far enough back home havent you?
-
1) makes sure the instrument panel is fully home
2) Check the fuses (cant remember which but F14 or 15 rings a bell)
-
u have to push it back and put the bolt back on
than try it ...
:y
i hope u didnt damge that bule paper in back of the speedo meter
make sure the blub holder are in right place
they conect with the blue paepar :y
-
Just changed the fuse an hour ago. As Mark said F15 will make the dash lights go out, so check it hasn't blown. I suspect the clocks aren't fully home. :y
-
Just changed the fuse an hour ago. As Mark said F15 will make the dash lights go out, so check it hasn't blown. I suspect the clocks aren't fully home. :y
Thanks all!
I have discovered a fuse that covers all the dash and consul had blown! All ok now. A very relieved Lizzie Zoom :D :D :D :D :y :y