Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: markey mark on 28 April 2008, 15:03:10

Title: WHATS THE DIFFERENCE
Post by: markey mark on 28 April 2008, 15:03:10

between 3.0 injectors and 3.2 injectors ?? they have different part numbers do they flow more ?? tia mark :y

Title: Re: WHATS THE DIFFERENCE
Post by: Kevin Wood on 28 April 2008, 15:16:58

Could be flow rate, spray pattern or impedance. 3.2 Has a different engine management setup so might have different requirements.

Do you know what part number is on them? Might be able to find the spec. from a manufacturer's part number.

Kevin

Title: Re: WHATS THE DIFFERENCE
Post by: markey mark on 28 April 2008, 17:54:51

nice one kevin part number is 0280156045 cheers fella :y

Title: Re: WHATS THE DIFFERENCE
Post by: Kevin Wood on 28 April 2008, 18:48:14

There is a useful list of specs here: http://www.injectorcleaning.co.uk/flow.htm

That one appears to be Bosch, 200 cc/min @ 3bar and 14.5 Ohms.

Have a look at the 3.0 injector and see if there's much difference in the spec..

Kevin

Title: Re: WHATS THE DIFFERENCE
Post by: markey mark on 29 April 2008, 09:27:58

thanks for that kevin mate  :y :y