Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ianboyo on 01 May 2008, 20:24:13

Title: mis firing
Post by: ianboyo on 01 May 2008, 20:24:13

hi can anyone help my meega 2.5 v6 new shape has just started to mis-fire i have just recently had a problem with mis-fire and changed the dis pac and the crank shaft senser which cured the problem 3 weeks later and it has started mis-firing again can anyone help
thanks
ian

Title: Re: mis firing
Post by: perfferle on 01 May 2008, 20:41:19

Hi Mate,
This problem seems like an epedemic because my engine is doing the same damn thing!
Someone suggested plug / HT leads..
check out my thread 'Omega V6 misfire' hopefully we will get past this.
Regards,
Stephen

Title: Re: mis firing
Post by: MutantCav on 01 May 2008, 20:49:29

Do you have oil in your spark plug wells? Have a cam cover oil leak?

Title: Re: mis firing
Post by: ianboyo on 01 May 2008, 20:58:18

no there is no oil in plug holes changed rocker gaskets recently changed dis pac and camshaft senser it must be plugs or leads would the senser in the cat cause it to mis-fire ?

Title: Re: mis firing
Post by: Entwood on 01 May 2008, 21:11:06

Lambda sensor problem would give you an EML light on .. as you don't have that my guess is HT problem .... :(

Have you done the paperclip test ?

Title: Re: mis firing
Post by: MutantCav on 01 May 2008, 21:22:40

Well I have plenty of sets of good HT leads if you need them...but check out everything you can first :)