Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mantagte on 02 May 2008, 22:05:48
-
hi all
whilst servicing my 2.0 16v 1995 omega i thought id do a paper clip test to see if there are any codes stored
it came back with 33 and 92
was surprised to find any as the car runs perfectly
92 is if i read the simtec 56.0 list in technical info correctly is camshaft sensor is this faulty or a false code as i thought when this goes the car would not run.
but what is 33? cannot find any information about this code
cheers
kev
-
Think the 33 code is inlet manifold pressure. 92 - camshaft sensor. Unless the EML is on then these are nothing to worry about. Have you noticed the EML coming on intermittently? You can try and get rid of the codes by taking the battery off for an hour or so. You'll probably get a reply shortly telling you this will not get rid of the old codes but it works for me so you should give it a try (won't do any harm).
Unless you have problems with your car I reckon these are old, stored codes from a previous time.