Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: DaviesEB on 19 May 2008, 09:18:51
-
Thanks to all who help get me diagnose my problem sometime back. I have sent for thr crank sensor.
One other question over time the headlamp glass looks dull. What can i use to clean it to give it the glass look.
Thanks :) :)
-
I used a fine cutting compound, used a soft sponge plenty of water as they do in body shops, comes up a treat.. ;) :y
-
What do you mean by cutting compound. Any particular type or make .
Thanks
-
What do you mean by cutting compound. Any particular type or make .
Thanks
T-Cut is ok
-
Thanks. I am located in Africa and we do not have such thing on our market. Can i get it in any store in the UK. Can you link me with a store where i can purchase same.
Thanks
-
T-cut will be available at any UK motor shop.
If it is yellowed a lot, T-cut may hot be harsh enough, you may need to start with a fine (1000) wet and dry, then go finer and finer, then finishing off with t-cut
-
What causes the blurred look on the headlights. Is it the intensity of heat over a period of time? or What?
Thanks
-
Thanks. I am located in Africa and we do not have such thing on our market. Can i get it in any store in the UK. Can you link me with a store where i can purchase same.
Thanks
http://cgi.ebay.co.uk/Yellow-T-cut-color-fast-MGF-FIAT-cleans-shines-restore_W0QQitemZ330236601565QQcmdZViewItem?hash=item330236601565&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14
or
http://cgi.ebay.co.uk/T-Cut-Glass-Polish-500ml-unopened-R-R-P-6-99_W0QQitemZ380027510054QQcmdZViewItem?hash=item380027510054&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14