Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jay w on 19 May 2008, 11:21:20

Title: What tools are needed in order to remove seats
Post by: Jay w on 19 May 2008, 11:21:20

I have got first dibs on this MV6 interior, however i don't have my toolkit with me  >:(

What would i need to remove front and back seats?

So far i can think of:
Ratchet & Extension
Torx bits (don't know what size)
Flat ended screwdriver
Cutters


Anything else?

Title: Re: What tools are needed in order to remove seats
Post by: TheBoy on 19 May 2008, 11:54:18

For fronts, simply large torx bits (can't remember size, but in region of T35) to remove seats, cabling will unplug.

Rears, something to lever out tabs for side bits, can't remember how backrests held in.

Title: Re: What tools are needed in order to remove seats
Post by: JamesV6CDX on 19 May 2008, 13:31:10

Quote

For fronts, simply large torx bits (can't remember size, but in region of T35) to remove seats, cabling will unplug.

Rears, something to lever out tabs for side bits, can't remember how backrests held in.

Front seats, almost certain T40 male.

Rears - 10mm spanner

Title: Re: What tools are needed in order to remove seats
Post by: Jay w on 19 May 2008, 14:21:10

Quote

Quote

For fronts, simply large torx bits (can't remember size, but in region of T35) to remove seats, cabling will unplug.

Rears, something to lever out tabs for side bits, can't remember how backrests held in.

Front seats, almost certain T40 male.

Rears - 10mm spanner

Thank you gents  :y

Title: Re: What tools are needed in order to remove seats
Post by: Dave-C on 20 May 2008, 20:10:41

Diss the battery to prevent airbag faults...  just incase you put the ignition on by mistake.....

DC

Title: Re: What tools are needed in order to remove seats
Post by: MutantCav on 20 May 2008, 20:26:23

Just taken some out so yes its a T40 and 10mm and I think I remember 13mm bolts holding the back seat backs to the centre arm rest...