Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bibbot on 24 May 2008, 17:51:55

Title: cam covers bolts hand tight ?
Post by: bibbot on 24 May 2008, 17:51:55

I HAVE FORGOT TO GET A LOW RENCH THAT WILL GO DOWN TO 8NU

IS THERE A WAY TO DO IT BY HAND/FEEL
THANKS

Title: Re: cam covers bolts hand tight ?
Post by: Entwood on 24 May 2008, 17:55:26

8nm is a VERY light "nip" ..

If you have a screwdriver type drive rather than a "crank" type handle I'd use that .. or just a socket and extension bar .. without the ratchet handle.  

It is far harder to overtorque just with the wrist  if you see what I mean ....  :(

HTH