Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Vamps on 25 May 2008, 23:50:50

Title: Changing Dis pack
Post by: Vamps on 25 May 2008, 23:50:50

How easy / hard is it to change a Dis pack on a 2.0L and any idea of the time involved.
Thanks

Title: Re: Changing Dis pack
Post by: perfferle on 26 May 2008, 21:53:48

Havent a clue matey but the V6 is a right B*****D! ;)

Title: Re: Changing Dis pack
Post by: tunnie on 26 May 2008, 21:55:35

done a V6 and its a pain.

2.0 must be a lot easier, you can see it!!

Title: Re: Changing Dis pack
Post by: perfferle on 26 May 2008, 22:01:45

Taking a stab at it-
If you can see the DIS pack then we could sumrise that one connector jack, about four bolts and four plug wires later you should have success.  ;)
UNLIKE the V6 where I had to remove - Scuttle, Plenum, Injector manifold to access the DIS pack and that took about 3 hours!! :y

Title: Re: Changing Dis pack
Post by: Vamps on 27 May 2008, 00:23:53

Quote

done a V6 and its a pain.

2.0 must be a lot easier, you can see it!!

Yep, you can see it, but can you get your hands in? managed OK good job I have got skinny arms and hands.
No chance of getting a socket on, star drive, what a pain. :(