Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bth2bth2 on 14 June 2008, 22:23:50

Title: v6 plug leads
Post by: bth2bth2 on 14 June 2008, 22:23:50

hi all,
just changed my cam cover gaskets and guess what? no6 plug lead broke.mmmmmmmmm not an uncommon occorance i believe.so ive had to order some for monday.
anyway,has any body got any tips for changing the leads.the drivers side seem to go into a cable keep on there way to the dis.do the new leads have to do the same or can the keep be dispensed with.
before i remove the old leads what positions do they occupy on the dis.i have 4 but unsure of the other 2.cant even see the posts to get the numbers.will be doing most of the job by feel me thinks.
any tips and info would be appreciated.
thanks
brian :o

Title: Re: v6 plug leads
Post by: JamesV6CDX on 14 June 2008, 22:30:35

I MAY have a known good no6 lead I could pop in a jiffy bag, if it would save you some pennies.

Title: Re: v6 plug leads
Post by: bth2bth2 on 14 June 2008, 22:39:27

thanks for the offer but ive just ordered a set.thought it best as i dont want to put it all back then find another may have gone.looks like its been iffy for a while.
offer much appreciated though.
thanks
brian :y

Title: Re: v6 plug leads
Post by: Pete Elite on 15 June 2008, 05:30:00

Hi Brian,
            I've just put a new set of leads on my 3.0L and the old ones also went through a cable keep which i just dispensed with as must have came ready fitted to the leads because no split for removal.

 As you say all done by feel, i just took one lead off the Dis. pack at a time, traced it back to plug and made a small drawing of where they all went and then just replaced starting on the bottom row of the Dis. pack. At least this way your assured of getting them in the right order.

  Hope this helps.
      
                 Pete :y.

Title: Re: v6 plug leads
Post by: bth2bth2 on 15 June 2008, 10:05:44

Quote

Hi Brian,
            I've just put a new set of leads on my 3.0L and the old ones also went through a cable keep which i just dispensed with as must have came ready fitted to the leads because no split for removal.

 As you say all done by feel, i just took one lead off the Dis. pack at a time, traced it back to plug and made a small drawing of where they all went and then just replaced starting on the bottom row of the Dis. pack. At least this way your assured of getting them in the right order.

  Hope this helps.
      
                 Pete :y.

thanks for that,
have got 4 idntified but wanted the last two to be sure.didnt want to make such a simple mistake that would be a pain to sort when its all back together.
much appreciated.
brian