Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: carper on 14 June 2008, 22:29:38

Title: Torque Settings
Post by: carper on 14 June 2008, 22:29:38
Weather permitting, I'm doing my cam belt kit/water pump change tomorrow. I've searched this site and the web for needed torque settings, but no luck, anyone help please  :question .
Title: Re: Torque Settings
Post by: rickyboy on 15 June 2008, 02:07:02
Torque wrench settings...

                                                          Nm                         lbf ft

Coolant pump....................................  25                          28

Timing belt cover bolts:
    Outer cover...................................   6                            4
    Rear cover.....................................  8                            6

Timing belt idler pulley:
    Pulley bolt......................................  25                          18
    Mounting bracket bolts....................  25                          18

Timing belt tensioner bolt....................  20                         15

These are taken straight out the Haynes manual.  Think these should be all the torque settings you'll need.  If you need any more just ask...  :y
Title: Re: Torque Settings
Post by: carper on 15 June 2008, 06:00:36
Thanks a million rickyboy, your a star.  :y
Title: Re: Torque Settings
Post by: iggy21uk on 15 June 2008, 13:19:41
Quote
Weather permitting, I'm doing my cam belt kit/water pump change tomorrow. I've searched this site and the web for needed torque settings, but no luck, anyone help please  :question .

Hope your using a locking kit?  :)
Title: Re: Torque Settings
Post by: JamesV6CDX on 15 June 2008, 13:21:37
Quote
Quote
Weather permitting, I'm doing my cam belt kit/water pump change tomorrow. I've searched this site and the web for needed torque settings, but no luck, anyone help please  :question .

Hope your using a locking kit?  :)

You don't need a locking kit, just a wedge to lock the cams.
Title: Re: Torque Settings
Post by: TheBoy on 15 June 2008, 13:24:57
Quote
Quote
Weather permitting, I'm doing my cam belt kit/water pump change tomorrow. I've searched this site and the web for needed torque settings, but no luck, anyone help please  :question .

Hope your using a locking kit?  :)
2l, so just a £4.99 draper camlock needed, not like the v6...
Title: Re: Torque Settings
Post by: iggy21uk on 15 June 2008, 14:11:39
Sorry ! Didn't notice the engine was 2l  :(