Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: spudboy on 25 June 2008, 12:42:45

Title: cam sensor
Post by: spudboy on 25 June 2008, 12:42:45

Hi was hoping someone can tell me where to find the cam sensor on a 2.o r-reg,changed the crank sensor on monday but the eml is still coming on with a dip in the revs so guess it may be the cam sensor,so want to change that to any help will be great,
    cheers

Title: Re: cam sensor
Post by: tunnie on 25 June 2008, 13:32:12

its right at the front, near the cams, should see a wire going into it right at the front of the ecotec strip.

You need to take the cam cover off, there is a tiny bolt holding it in, sits between the cams.

Title: Re: cam sensor
Post by: rickyboy on 25 June 2008, 16:52:43

Quote

its right at the front, near the cams, should see a wire going into it right at the front of the ecotec strip.

You need to take the cam cover off, there is a tiny bolt holding it in, sits between the cams.

And take the ecotec strip (spark plug cover) off and unplug the sensor first.  

A simple clean of the sensor and it's mating surface often fixes the problem, so cheaper to give that a go first rather than buying a new one.