Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: amba on 29 June 2008, 09:47:02

Title: EGR pipe recoat
Post by: amba on 29 June 2008, 09:47:02

Not sure if most peoples engine bay is let down by the rusty manifold pipe from the plenum which has the EGR mounted on it.
Mine is really rusty and was hoping to either get another and powder coat or can they be cleaned up well.?If any body has done a repaint on it advise would be appreciated or if anyone has a spare that I can buy and try and get powdere coated ,drop me a pm with price.
l

Title: Re: EGR pipe recoat
Post by: philhoward on 29 June 2008, 11:43:52

Not sure if power coating would survive, but stove enameling would..they use to do whole exhaust manifolds in it.

Title: Re: EGR pipe recoat
Post by: albitz on 29 June 2008, 13:14:38

bbq paint ?

Title: Re: EGR pipe recoat
Post by: Pete Elite on 29 June 2008, 18:27:21

 
  Hi,
     Just done mine, cleaned with a wire wheel in my drill then gave it a coat of Matt Black Very High Temperature paint from Halfrauds :y.

Title: Re: EGR pipe recoat
Post by: Jay w on 29 June 2008, 18:50:29

Smoothrite should do the trick as well. that is high temp paint