Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Richie London on 02 July 2008, 07:41:44

Title: code 19
Post by: Richie London on 02 July 2008, 07:41:44

i know its incorrect rpm signal, what do i need to do to rectify this code. ive got new plugs in, possibly need new leads, car seems to be running ok, rpm is about 600-700 any ideas fellow members??

Title: Re: code 19
Post by: dbug on 02 July 2008, 08:19:25

Fit new crank sensor

Title: Re: code 19
Post by: Dazzler on 02 July 2008, 09:17:50

It means crank sensor will fail soon.
So as already said, replace it ASAP ;)

Title: Re: code 19
Post by: MutantCav on 02 July 2008, 10:04:38

31 is incorrect signal mate, 19 is crank shaft sensor failure (or imminent failure)...end of...

Title: Re: code 19
Post by: Entwood on 02 July 2008, 10:31:57

As said .. 19 = crank sensor .. this is one of the very few bits of kit that will render a miggy completely un-startable ... and it is on its way to total failure .. so change ASAP or you run the risk of being stranded somewhere.

On the advice of one of the more senior members of the forum, I now carry a spare crank sensor in the car - it was originaly intended as a backup on long journeys, but now "lives" in the jack storage facility .. if it fails the AA can change it for me  :)

Title: Re: code 19
Post by: bigdods on 02 July 2008, 13:10:57

Crank sensor for sure. Had my miggy tech2'd by TB a few weeks back and he found a code 19 (although I hadnt got any problems), told me to get the crank sensor changed. 2 days later EML starts flashing - crank sensor failed.

Title: Re: code 19
Post by: Richie London on 02 July 2008, 16:27:22

cheers. i shall look forward to doing this in the morning after a 12 hr night shift  :'( ;)

Title: Re: code 19
Post by: Richie London on 02 July 2008, 18:42:44

does anyone know what the vaux trade club price is???

Title: Re: code 19
Post by: TheBoy on 02 July 2008, 20:19:27

Quote

31 is incorrect signal mate, 19 is crank shaft sensor failure (or imminent failure)...end of...

Nope, 31 = no rpm signal (engine not running, or sensor completely fubar), 19 = recent incorrect signal (sensor will fail soon)

Title: Re: code 19
Post by: TheBoy on 02 July 2008, 20:19:50

Quote

does anyone know what the vaux trade club price is???

not tc item