Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: psychnurse on 20 July 2008, 19:03:13
-
keeps appearing on the V6.. not low.
Where is the sensor, or what do I check to remedy.
:y
-
keeps appearing on the V6.. not low.
Where is the sensor, or what do I check to remedy.
:y
Sensor is passenger side of bottle. Remove bumper to get to it. The sensor will be buggered.
-
keeps appearing on the V6.. not low.
Where is the sensor, or what do I check to remedy.
:y
Sensor is passenger side of bottle. Remove bumper to get to it. The sensor will be buggered.
Any idea of cost new? Or seconds ok??
Will have a look 2mora. :y
-
keeps appearing on the V6.. not low.
Where is the sensor, or what do I check to remedy.
:y
Sensor is passenger side of bottle. Remove bumper to get to it. The sensor will be buggered.
Any idea of cost new? Or seconds ok??
Will have a look 2mora. :y
Dunno, I used one from scrapyard on Proj TB1
-
keeps appearing on the V6.. not low.
Where is the sensor, or what do I check to remedy.
:y
Sensor is passenger side of bottle. Remove bumper to get to it. The sensor will be buggered.
Any idea of cost new? Or seconds ok??
Will have a look 2mora. :y
Dunno, I used one from scrapyard on Proj TB1
That will do me. Will ask on wanted/sale bit.
Cheers TB :y
-
Might be all gummed up with muck??? I'd empty the tank by twisting out the pump.....water everywhere...then get a hose in there and give it a good blast out??? Gotta be worth a try for nothing.
-
Might be all gummed up with muck??? I'd empty the tank by twisting out the pump.....water everywhere...then get a hose in there and give it a good blast out??? Gotta be worth a try for nothing.
Yeah... your right. Will give that a go first :y :y
-
Give the bottle a good rinse through with Milton or Jeyes fluid :y
-
I've never managed to reliably revive a washer level switch, but always worth a try :y
They are reliable enough to pick a 2nd hand one up, though may be worth rining dealer, as if they are only a fiver new.....