Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Markie on 10 February 2007, 12:09:59

Title: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Markie on 10 February 2007, 12:09:59

I need to ensure that the thermostat and another associated part for my 2.6 vectra are the same as the 2.6 omegas.

Could someone confirm the following....

thermostat part number 24420652 from vectra 2.6  - is this only on the vectra 2.6 or is it the same part on 2.6 omega ( or 2.5 omega?)

Pipe running from thermostat outwards ( metal pipe) part number 90411829 - same info required.

Oh and can anyone actually tell me what 90411829 is called ? a vx price would also be mega......

 :y :y :)

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: JasonH on 10 February 2007, 15:45:25

Unfortunately the info I have says:

90411829 is COVER, TIMING BELT, FRONT, LOWER (for 1.4 and 1.6 engines)

And

24420652 is Vectra only (for 2.5 and 2.6)

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Markie on 10 February 2007, 15:57:15

Quote

Unfortunately the info I have says:

90411829 is COVER, TIMING BELT, FRONT, LOWER (for 1.4 and 1.6 engines)

And

24420652 is Vectra only (for 2.5 and 2.6)

i may have taken the number down wrong  :-/ could you try 90411629?

cheers

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: JasonH on 10 February 2007, 18:14:18

90411629 is PIPE THERMOSTAT HOUSING TO HOSE

It's for X25XE, Y26SE, X30XE,  Y32SE

Vectra, Omega and Sintra

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Marks DTM Calib on 11 February 2007, 10:22:09

All the V6 stats and housings are the same......

Probably mentioned this before but, the actual stat insert is the same as the 4 pot ones (which is cheaper) and can be swapped over if the housing is ok....

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Markie on 11 February 2007, 16:40:43

thanks guys  :y

Mark you have mentioned this before i take it the stat is easy enought to remove from housing and swap over? never really studied them in great detail... :-X

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Marks DTM Calib on 11 February 2007, 17:05:18

Yes it is....press it in and twist...its a bayonet style fitting....

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Markie on 11 February 2007, 18:14:54

Quote

Yes it is....press it in and twist...its a bayonet style fitting....

Thanks Mark - got the old stat out quite easy - think i will go down this route to renew  :y

Title: Re: Y26SE Engine parts Omega/ Vectra compatibility
Post by: Bionic on 26 July 2008, 17:53:51

Sorry to be a pain but does the thermostat fit into the end of the metal housing or into the top hose attached to it from the radiator as my thermostat is missing?
What is the metal pie on the back of the engine they are talking about too?
Regards
Ray