Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: CBH on 27 July 2008, 12:16:48

Title: Clearing fault codes
Post by: CBH on 27 July 2008, 12:16:48

Hi
How do you clear fault codes.
I have replaced my EGR but the paperclip test still shows code 129.
I hope this because it is stored and needs to be cleared.
put the EGR on another Omega and it was ok no codes.

Title: Re: Clearing fault codes
Post by: Varche on 27 July 2008, 12:22:51

I'm fairly certain it is 20 clean starts after the fault has been rectified.

varche

Title: Re: Clearing fault codes
Post by: jonathanh on 27 July 2008, 12:27:25

yep

no need to turn the motor over, just turn ign on and wait for the eml lights to come on and go out 20 times

Title: Re: Clearing fault codes
Post by: CBH on 27 July 2008, 12:54:16

Did 20 starts and the code has gone
Thanks