Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 11 August 2008, 19:58:50
-
Head gaskets x 2
Stem seals x 24
Coolant bridge doughty washers x 4
Oil cooler kit (Do VX sell a "kit" or do I have to ask for the parts on their own?)
Genuine Exhaust gaskets x 2
Genuine exhaust downpipe rings x2
Camcover seal kit (shop?)
Plugs x 2 (I already have 4)
Have oil
Coolant x 5l
Oil filter
Rear transfer pipe seal
Thermostat, thermostat O ring, transfer pipe O rings. (Want to change stat, as it's running too cool.)
Grey Goo
Green goo
Any rough idea on what this little lot will set me back? :-[
-
Head gaskets x 2
Stem seals x 24
Coolant bridge doughty washers x 4
Oil cooler kit (Do VX sell a "kit" or do I have to ask for the parts on their own?)
Genuine Exhaust gaskets x 2
Genuine exhaust downpipe rings x2
Camcover seal kit (shop?)
Plugs x 2 (I already have 4)
Have oil
Coolant x 5l
Oil filter
Rear transfer pipe seal
Thermostat, thermostat O ring, transfer pipe O rings. (Want to change stat, as it's running too cool.)
Grey Goo
Green goo
Any rough idea on what this little lot will set me back? :-[
Don't forget to add black goo and new stretch bolts
-
Of course, bolts...
-
vx dont do an oil cooler kit, but everything you need is here (including part numbers)
http://www.omegaowners.com/forum/YaBB.pl?num=1211220529
:y
-
I still think you should go fishing first, then start the fekker if all else fails....
-
I will definately go fishing, this is if all else fails....
-
you have done enough of the V6 HG's to know the cost by now!
-
Add a spare T55 bit, they only last for a few heads then explode.
PM Mark about head bolts, we had some crap ones recently with distorted threads and others that snapped after the first 90 deg :o, think we used FAI in the end but he should remember
-
you have done enough of the V6 HG's to know the cost by now!
Yes, but never one with all genuine parts ;)