Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: valliant72 on 16 August 2008, 21:16:35

Title: Crank Sensor again
Post by: valliant72 on 16 August 2008, 21:16:35

Hi, i Changed my crank sensor about 2 months ago, still when i do a paper clip test it show code 19. Could i have got a faulty sensor or could it be an ECU problem.
thanks

Title: Re: Crank Sensor again
Post by: v6coop on 16 August 2008, 21:22:15

Seem to remember it takes thirty plus starts before the fault clears. I take it you have started it up more times than this in the couple of months since replacing?

Title: Re: Crank Sensor again
Post by: valliant72 on 17 August 2008, 01:09:24

been started more than 50 times at least, so not sure why the code isnt deleting itself  :-?

Title: Re: Crank Sensor again
Post by: psnimv6 on 17 August 2008, 08:26:17

i would,nt panic as from time to time my car also shows code 19 and i to replaced the sensor a few months back but just in case i always carry a spare on long trips  ;)

Title: Re: Crank Sensor again
Post by: Marks DTM Calib on 17 August 2008, 08:45:17

Question I would pose is, was it a genuine sensor or a cheap alternative from ebay?