Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: OMEGA VXR on 11 September 2008, 13:47:28
-
2 things....Now I've fitted the new cam sensor I've been informed that the EML will need resetting using tech 2 something to do with the system still reading the fault code? is this correct as Im not to sure :-/
Does anybody know of anywhere in Leicester?
Cheers
-
Any old cheapo device will reset the codes :y
-
Any old cheapo device will reset the codes :y
Like what James :).......new to all this?
:-[
-
stick "tech2" into ebay :y
-
1994 might be Tech 1 ????
-
1994 might be Tech 1 ????
It's a 16v...
-
2 things....Now I've fitted the new cam sensor I've been informed that the EML will need resetting using tech 2 something to do with the system still reading the fault code? is this correct as Im not to sure :-/
Does anybody know of anywhere in Leicester?
Cheers
You want to reset the EML? If you've fixed the fault, then the light will go out anyway. If the EML lamp is still lit, then you still have a fault somewhere. The TechII (both real or cheapo) will only reset the fault codes stored in the ECU, which 20 'clean' starts will do anyway.
-
Can you "paperclip" the 16 V ??? If so...
http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
and tell us the results ... :)
-
1994 might be Tech 1 ????
It's a 16v...
Iggy21uk is still right, Tech1....
No idea if cheap Tech2 will, think Opelscanner can.
-
It's in the Opelscanner menu never tried, is it the same diag socket or the 10 pin socket?
-
It's in the Opelscanner menu never tried, is it the same diag socket or the 10 pin socket?
std 16pin obdii type socket (even though its not obdii compliant car)