Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: george1965 on 02 October 2008, 11:09:12

Title: ecu on steering column
Post by: george1965 on 02 October 2008, 11:09:12

if i fit a used ecu on the steering column do i have to get it recoded, dont have car pass so what do i have to do to get one and what documents would i have to take to the dealer. car is omega 2.5 v6 1998. HELP

Title: Re: ecu on steering column
Post by: markey mark on 02 October 2008, 13:56:57

go to vaux with log book and proff of address and ask them to order a car pass normally takes 24/48 hours then you can get it recoded :y

Title: Re: ecu on steering column
Post by: TheBoy on 02 October 2008, 21:16:07

This is immobiliser ecu,and the engine ecu needs to be coded to it.

To program keys to the new immobiliser, you need the security code from the new immobiiliser.