Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: f13platform on 11 October 2008, 22:23:39

Title: any one can help me please
Post by: f13platform on 11 October 2008, 22:23:39
start the car today and die after 1 secend

i start agine run ok after 2 min EML came on

i turn the car off and clean the MAF and put it back on right place

the car start fine no EML i went for drive everything fine

i ve done the test and i had the code p0130

what should i do ???

is that something can let me down in motor way???
Title: Re: any one can help me please
Post by: feeutfo on 11 October 2008, 22:37:22
o2 sensor, lambda on the exhaust.
Title: Re: any one can help me please
Post by: feeutfo on 11 October 2008, 22:40:13
Quote
o2 sensor, lambda on the exhaust.
sorry thats probably not right, looking at wrong list, is there a 2.0 litre code list on here?/
Title: Re: any one can help me please
Post by: f13platform on 11 October 2008, 23:15:41
i think u right .it s o2 sensor

is that easy to change ? where is it ?

can i just leave it until i change the car in 1 or 2 month?
Title: Re: any one can help me please
Post by: alexandjen on 11 October 2008, 23:22:13
Quote
Quote
o2 sensor, lambda on the exhaust.
sorry thats probably not right, looking at wrong list, is there a 2.0 litre code list on here?/

Looks like you are right Chris............

http://www.omegaowners.com/forum/YaBB.pl?num=1206569943
Title: Re: any one can help me please
Post by: feeutfo on 11 October 2008, 23:25:06
question is, is it the sensor faulty, or has the sensor detected something out of wak?  :-/
Title: Re: any one can help me please
Post by: f13platform on 11 October 2008, 23:28:08
 :-/ :'(
Title: Re: any one can help me please
Post by: feeutfo on 11 October 2008, 23:29:19
Quote
Quote
Quote
o2 sensor, lambda on the exhaust.
sorry thats probably not right, looking at wrong list, is there a 2.0 litre code list on here?/

Looks like you are right Chris............

http://www.omegaowners.com/forum/YaBB.pl?num=1206569943

yeah, 3 options on that list, presume 2 voltage enties relate to wiring or faulty sensor, 3rd being related to what it reads in the exhaust...

Title: Re: any one can help me please
Post by: feeutfo on 11 October 2008, 23:32:07
Quote
:-/ :'(
yes i think you know dont you??
Title: Re: any one can help me please
Post by: f13platform on 11 October 2008, 23:36:57
now yes thank u so much for ur help

everything work fine now. if the light come back i have to change it ...

is that easy to change it ?
Title: Re: any one can help me please
Post by: feeutfo on 12 October 2008, 00:15:50
Quote
now yes thank u so much for ur help

everything work fine now. if the light come back i have to change it ...

is that easy to change it ?
depends if its seized in, may need heat to get it out, but do me a favour check your oil looks ok on the dip stick, make sure no mayo or thin oil...
Title: Re: any one can help me please
Post by: f13platform on 12 October 2008, 01:15:00
ok i ll let u know

the oil is 5w 40 and done about 600 m
Title: Re: any one can help me please
Post by: f13platform on 12 October 2008, 14:16:02
Quote
Quote
now yes thank u so much for ur help

everything work fine now. if the light come back i have to change it ...

is that easy to change it ?
depends if its seized in, may need heat to get it out, but do me a favour check your oil looks ok on the dip stick, make sure no mayo or thin oil...


i check everything today just fine . went for drive in motorway

about 50 /60 m :o :o :o no light everything was even better

and faster  :o :o