Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Richie London on 17 October 2008, 14:30:17

Title: just changed ht leads, need help
Post by: Richie London on 17 October 2008, 14:30:17

started ok, does sound better but a code 135 has come up on paper clip test. i did 1 plug at a time, and all fit ok. also found a 3 pin connector at back not plugged into anything????

Title: Re: just changed ht leads, need help
Post by: Jimbob on 17 October 2008, 14:32:14

3 pin connector - not an old crank sensor wire is it?

Title: Re: just changed ht leads, need help
Post by: Jimbob on 17 October 2008, 14:35:56

Did you paperclip before hand for reference?

135   Telltale (Checklight) Voltage Low

Title: Re: just changed ht leads, need help
Post by: Richie London on 17 October 2008, 14:41:42

Quote

3 pin connector - not an old crank sensor wire is it?

could be, its just laying there, i do remember cutting it as high as i could.

i did paperclip test as i re started car after lead change

Title: Re: just changed ht leads, need help
Post by: Richie London on 17 October 2008, 14:43:00

if i remember this code came up after i bought new battery too, then just went away next day

Title: Re: just changed ht leads, need help
Post by: Lizzie_Zoom on 17 October 2008, 18:53:59

Quote

started ok, does sound better but a code 135 has come up on paper clip test. i did 1 plug at a time, and all fit ok. also found a 3 pin connector at back not plugged into anything????

Yes, I have one of those Richard on my 2000 2.5 V6 ;)