Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Richie London on 19 October 2008, 23:04:52

Title: breather pipes
Post by: Richie London on 19 October 2008, 23:04:52

how do i know if there round the wrong way, doesnt sound the same since i put new ht leads on???

Title: Re: breather pipes
Post by: Richie London on 19 October 2008, 23:05:31

sorry forgot to say i took the plenum off and cleaned pipes

Title: Re: breather pipes
Post by: albitz on 19 October 2008, 23:18:02

Pretty sure there is a diagram in the guides. :y

Title: Re: breather pipes
Post by: MikeDundee on 20 October 2008, 06:43:38

Heres the link; http://www.omegaowners.com/forum/YaBB.pl?num=1152598350

Title: Re: breather pipes
Post by: Richie London on 20 October 2008, 10:30:31

cheers, shall have a look this morning  :y

Title: Re: breather pipes
Post by: eddie on 20 October 2008, 11:19:30

The 2 big ones are straightforward ! Of the 2 small ones,drivers side one goes to the lower crank breather,the one with the silly little hole in it.

eddie

Title: Re: breather pipes
Post by: Richie London on 20 October 2008, 12:31:15

just checked, both in right place, sounds like its still missing though,  >:(

Title: Re: breather pipes
Post by: Lazydocker on 20 October 2008, 15:16:33

Slight air leak after refitting plenum? I had the same when I did my Crank Sensor ::) ::)

Title: Re: breather pipes
Post by: Richie London on 20 October 2008, 16:23:52

Quote

Slight air leak after refitting plenum? I had the same when I did my Crank Sensor ::) ::)

looks like i'll have to strip it and refit slowy to see what ive done wrong  :(