Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: madbiker on 24 October 2008, 23:07:14

Title: Torque Settings
Post by: madbiker on 24 October 2008, 23:07:14

Hi can anyone tell me wot the torque should be for the inlet to manifold on the V6. Iv just changed the rocker cover gaskets and will be putting it back together 2moro. Also the plenum torque too, im ok with the rockers at 8nm just the others ta. :-? :-/

Title: Re: Torque Settings
Post by: iainb on 24 October 2008, 23:11:47

20 NM for inlet manifold

Title: Re: Torque Settings
Post by: feeutfo on 24 October 2008, 23:19:20

settings are listed in the Haynes book of lies and in maintenance section under V6 Torque Values.
Hope helps.

Title: Re: Torque Settings
Post by: madbiker on 24 October 2008, 23:21:43

Thanks for the help