Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: topcat on 25 October 2008, 19:24:09

Title: How hard can it be
Post by: topcat on 25 October 2008, 19:24:09

Need to change exhaust manifold gasket on near side allso noticed a stud broken off flush with manifold .Haynes says remove engine or head is this right just what is it that stops it to come off and how long a job hope someone can help thanks

Title: Re: How hard can it be
Post by: Marks DTM Calib on 25 October 2008, 19:44:24

Which engine?

Title: Re: How hard can it be
Post by: topcat on 25 October 2008, 19:47:37

sorry a 2.5 v6

Title: Re: How hard can it be
Post by: serek on 25 October 2008, 20:21:53

try here
http://www.omegamechanic.co.uk/

Title: Re: How hard can it be
Post by: Marks DTM Calib on 25 October 2008, 21:04:30

Yes it can be one....worst case is you have to remove the engine mounts hilst supporting the lump so you cna shift it over to the drivers side by an inch.

Its actulay quicker than the drivers side to do.

The broken stud might be a challenge though!