Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: max23261 on 14 October 2008, 20:44:20
-
hi guys, my remote fob doesnt want to work ok to open the car but will not close.put new batteries in but still the same.where can i get a new one and do i need to have it programmed.
max
-
Does the light work?
If not it needs new switches - PM me
-
hi, yes the light works
-
hi, yes the light works
If it works on all buttons no idea, if the light work with the working functions but not the non working - it is switches
-
hi, yes the light works
If it works on all buttons no idea, if the light work with the working functions but not the non working - it is switches
I would still say switches...
-
Try syncing it
-
how do you synch it?
-
how do you synch it?
Put key in ignition and switch on ignition; system will then remain
in synchronizing mode for 30 seconds.
Briefly press either of the buttons on the remote control unit while the key is in the ignition.
The central locking system should lock and unlock to show that the remote control has been synchronized.
If it does that should then work ok. :y
-
hi guys, thanks for all your help remote works ok now.
max :y
-
i have simalar prob with mine and been to vx n they want 60 plus vat for new key fob and to re program just wandering if there is a cheaper alternative or where i could possibly get a fob ????
-
Buy a (correct!!) fob from egay, then come see me, M DTM or Kevin Wood ;)
-
hi guys, thanks for all your help remote works ok now.
max :y
Wot was the cure? Resyncing? Helps other members to know result :y
-
www.remotekey.co.uk/cars/vauxhall/vectra-omega-3.
i came accross this web site and seems to be the cheapest around. as for solving my problem i resynchcronised the fob while sitting in the car just turn on ignition and press fob. doors will lock press again and they should open.now you should be synchcronised
thanks again for your help.
max :y
-
:y :y
-
Buy a (correct!!) fob from egay, then come see me, M DTM or Kevin Wood ;)
Think I've got myself the wrong one (Delphi 433.92Mhz instead of Kiekert 433Mhz). I take it they are not interchangeable. Silly question, I know, but has to be asked now I've bought the damned thing.
Is an easy way to spot the difference that one has an LED and the other doesn't?
:(