Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: stutiff2 on 12 November 2008, 20:48:15

Title: prop shaft
Post by: stutiff2 on 12 November 2008, 20:48:15
hi all i went to start a job on my 95 2.0l 16v manual estate mig which was changing prop shaft i brought a prop and thought i will measure the length and mine is 65 inch and the replacment it 56 inch long but everythink looks the same the one i brought was ment to be off a p reg estate any ideas?
Title: Re: prop shaft
Post by: Marks DTM Calib on 12 November 2008, 21:13:54
lol.....the front section is different between manual and auto
Title: Re: prop shaft
Post by: tunnie on 12 November 2008, 21:58:25
was the other prop from an auto? would be much shorter cause the autobox is longer than the manual
Title: Re: prop shaft
Post by: stutiff2 on 13 November 2008, 21:12:46
dont know if it was off a auto or manual just didnt think to ask stupied me but when i lifted the prop up in the air next to mine the rear looked same just the front a bit shorter.